Don't Get Fooled! Debunking Common Car Myths

While pranks and laughter are the order of the day, the world of cars isn't immune to its share of myths and misconceptions. Today, we'll separate fact from fiction and debunk some common car myths that might have you fooled.

Myth #1: Turning off your car at a red light saves gas.

Fact: Modern cars with fuel injection systems actually use slightly more gas when restarting compared to idling for short periods. However, excessive idling (over 2 minutes) is still wasteful and should be avoided.

Myth #2: You can roll down your windows to cool down your car faster than using the AC.

Fact: While it might seem logical, rolling down windows creates drag, reducing fuel efficiency and slowing down the cooling process. Using your air conditioning, especially on high for a few minutes, is actually faster and more efficient.

Myth #3: Putting a potato in your tailpipe will muffle your exhaust sound.

Fact: Not only is this incredibly dangerous (it can block exhaust fumes and cause carbon monoxide poisoning), it's also completely ineffective. Modifying your exhaust system for sound is illegal in most areas and can damage your car.

Myth #4: Premium gas gives your car more horsepower.

Fact: In most cases, premium gas is not necessary for everyday driving. It's designed for high-performance engines that require higher octane ratings. Using premium gas in a car designed for regular gas won't provide any additional benefits.

Myth #5: A clean car is more fuel-efficient.

Fact: A dirty car with excessive drag (like mud or grime) can slightly decrease fuel efficiency. However, regular car washes won't significantly impact your gas mileage.

Myth #6: You should warm up your car before driving on cold days.

Fact: Modern fuel-injected engines are designed to warm up quickly while driving. Idling for long periods is unnecessary and can waste gas and contribute to pollution. It's better to start your car and drive gently for a few minutes until it reaches operating temperature.

Myth #8: All transmission fluids are the same.

Fact: Different car models require specific transmission fluids. Using the wrong type of fluid can damage your transmission. Always consult your owner's manual or a qualified mechanic for the correct transmission fluid for your car.

Myth #9: Filling your gas tank in the morning gets you more gas.

Fact: Gas is stored underground in tanks with consistent temperatures, regardless of the time of day. The pump dispenses gas at the same density no matter when you fill up.

So, there you have it! Hopefully, this article has helped clear up some common car myths and ensure you're taking proper care of your vehicle. Remember, when it comes to car advice, always consult your owner's manual or a trusted mechanic for accurate information. Happy April Fools' Day, and drive safe!

.

How Low Will You Let It Go?
In the world of cars, there's a risky dance we all play it's called the Fuel Level Limbo. How low can you go with your fuel gauge before your car decides it's had enough of your shenanigans?;

The Sediment Shuffle: Dancing with Dirt

First up in our limbo line is the sediment shuffle. You see, your fuel tank isn't a pristine oasis. It's more like a mini desert, complete with its own set of buried treasures, sediment and gunk. Go too low on fuel, and your car starts picking up this dance floor debris, leading to a not-so-funky clog in your fuel system.

The Pump Plunge: A Drying Dilemma

The fuel pump loves a good swim. But in the Fuel level limbo, it's like being at a pool party with no water. Running on low fuel means the pump gets no cooling or lubrication, think of it as trying to dance in quicksand. Spoiler alert: it doesn't end well for the pump

The Gauge Guessing Game: Fuel Forecasting Fiascos

Ever play the guessing game with your fuel gauge? Trying to predict exactly how many miles you can push before your car sputters to a stop is like trying to forecast the weather with a magic 8-ball. Spoiler, Outlook not so good

Stranded Salsa: The No-Gas Tango

There's nothing like the dance of desperation when you're stranded on the side of the road. It's a unique mix of the regret-rumba and the frustration-flamenco. Trust me, roadside assistance doesn't appreciate impromptu dance performances

The Wallet Waltz: Fuel Efficiency and Your Finances

Dancing on the edge of an empty tank isn't just risky; it's also a waltz with your wallet. Consistently running low can mean more trips to the mechanic, and those visits can have more zeroes on the bill than you'd like.

Keeping the Tank Tango at Bay

So, what's the moral of our Fuel Level Limbo story? Keep that fuel dance above the danger line. It's cheaper, safer, and far less embarrassing than doing the roadside stranded salsa. Happy driving, and may your fuel gauge always be a limbo stick that's set just right!

The Safe Way to Defog Your Windshield

Driving with a clear view is not just a matter of convenience; it's a critical safety necessity. A fogged-up windshield can transform an ordinary drive into a perilous endeavor, significantly increasing the risk of accidents. When visibility drops, so does your ability to respond to road conditions and hazards.

We'll dive into the science behind windshield fog and offer practical, safety-first techniques to ensure you maintain the clearest view possible. Whether you're facing the early morning chill or the humid evening return from work, understanding how to quickly and safely defog your windshield is key to a safe journey. Let's clear things up.

Understanding Windshield Fog

Why Windshields Fog Up:
Imagine your vehicle as a contained climate system. The warm air, cozy from your car’s heating system or simply from passengers, confronts the cold surface of the glass and rapidly cools down, shedding its moisture as condensation. This process results in a fine mist of droplets clinging to the inside of your windshield, scattering light and obscuring your view.

Understanding the Risks:
Compromised visibility due to fogged glass is a serious safety hazard. Inadequate visibility means you are less likely to notice pedestrians, other vehicles, and road signs in time to react appropriately. It's essential for the safety of yourself and others to maintain a clear windshield and ensure full visibility at all times.

Preventative Measures

Anticipating fog before it happens can help you maintain a clear windshield and improve safety. Here are some measures to prevent your windshield from fogging:

Ventilate Your Vehicle:
To prevent condensation, it’s beneficial to allow the interior of your car to ventilate, especially overnight. Leaving your windows slightly open can balance the inside and outside temperatures, reducing the likelihood of fog formation.

Regular Maintenance Checks:

• Cabin Air Filters: Keep your cabin air filters clean to ensure adequate airflow, which is vital for effective defogging.

• HVAC System: Regular checks on your heating, ventilation, and air conditioning system can help prevent fogging by ensuring it operates efficiently.

Pre-emptive Climate Control:
Before exiting your vehicle, switch to fresh air mode to expel moist air and cool the interior, reducing the chance of fogging when the vehicle is next used.

Defogging Techniques for Safety

When faced with a fogged windshield, you need to act fast, but always with safety in mind. Here’s what to do:

1. Start Your Engine: Before driving, start your car and begin the defrost cycle to enhance visibility.

2. Use the Defroster: Engage the defroster to warm the windshield and evaporate condensation.

3. Adjust the Airflow: Direct vents towards the windshield and side windows to disperse the fog.

4. Temperature Settings: Adjust the temperature to match the exterior conditions—warm to counteract cold, cool for warmth.

5. Activate the A/C: Use the air conditioning to dehumidify the cabin and clear the fog faster.

6. Turn Off Recirculation: Switch off the recirculation to allow dry outside air to enter the vehicle.

Safety Tips While Defogging:

• Do Not Drive Blindly: Ensure at least partial visibility before starting to drive and pull over if visibility is impaired while driving.

• Use Wipers: Utilize your windshield wipers to clear external condensation.

• Window Cracking Technique: Slightly open windows to balance the internal and external climate, aiding the defogging process.

• Manual Wiping: If necessary, use a clean microfiber cloth to manually clear the fog.

• Regular Cleaning: Maintain a clean windshield to prevent excessive fogging.

Remember, arriving safely is more important than arriving on time. It's better to delay your trip momentarily than to drive with obscured visibility.

Choosing the Right Products

Using the appropriate products is crucial for effective defogging and safety. Here are some recommendations:

• Anti-Fog Solutions: Opt for automotive-specific products like Stoner Invisible Glass Anti-Fog or Rain-X Anti-Fog, which prevent moisture build-up on the glass.

• Cleaning Solutions: Use automotive glass cleaners designed for vehicle interiors that do not leave residues.

• Cloths and Tools: Employ microfiber cloths for their lint-free and streak-free properties, and keep a squeegee handy for quick moisture removal.

Safety Considerations:

• Test products on a small area of the glass to ensure they do not obstruct visibility.

• Confirm that the products used do not interfere with windshield sensors or cameras, especially in vehicles with ADAS.

Be proactive in maintaining your vehicle's defogging capabilities. Keep the necessary tools on hand, regularly check your car's systems, and pull over if your visibility is compromised. Remember, safe driving is not just about reacting to conditions; it's about being prepared for them. Drive safely, stay visible, and enjoy the clarity of your journey.

How To Safely Remove Ice and Snow From Your Car

Winter can bring a variety of problems with your car – from icy windshields to frozen lock mechanisms. But one of the most common winter car troubles is having to clear away ice and snow, which can quickly become an annoying and potentially dangerous job. To make things easier we’ll provide you with some simple tips and tricks for safely removing ice and snow from your car.

Check Your Car’s Temperature

The first step in safely removing ice and snow is to make sure that your car is at the right temperature. Generally speaking, you don’t want the engine to be too hot or too cold; if it is too cold, any sudden change in heat could cause glass (including the windshield) to crack or shatter. So be sure to start your car up and let it sit idle until its temperature reaches a comfortable “warm-to-the-touch” level before attempting any removal attempts.

Start With The Windows

Once you have an acceptable temperature inside your car, it’s time to start removing that pesky layer of ice and snow! The best place to start is with the windows; this will allow you maximum visibility when driving once everything has been cleared away. Begin by scraping off any snow or ice build up on the exterior of each window using either a plastic or rubber scraper or even a credit card; then move on to clearing away frosty condensation from inside (for this, a cloth should do). Once you have removed as much as possible, turn on your defroster until all glass is completely cleared away. 

Use A Deicing Agent

If scraping alone doesn’t seem to cut it – especially if you are dealing with thick layers of frozen water – consider using a deicing agent like rock salt or even diluted rubbing alcohol (make sure not to use straight rubbing alcohol as this could damage paint jobs). Sprinkle these substances onto the problem areas on both the outside and inside of your windows (just remember not to get any of these agents on any part of your vehicle’s interior). Let it sit for a few minutes before attempting another scrape – this should help break up large chunks of ice into smaller pieces that can be more easily removed. 

Finish With A Cleaning Wipe Down

Once all visible snow/ice has been removed from both exterior AND interior surfaces, give everything one final wipe down using paper towel or newspaper – just make sure whatever material you are using does not contain any dyes/inks that could stain fabric surfaces like dashboard coverings or floor mats! This will ensure no dust remnants remain after completion and prevent interior surfaces from becoming wet due to any residual moisture. By following the simple steps outlined above, you can make short work of removing snow and ice from your car.

What does Winterizing your car actually mean?

Every year you hear it, but what does winterizing your car actually mean? Extreme cold can be hard on your vehicle, it is always a good idea to get it checked out by a mechanic at Our Service Center before the onset of extreme cold temperatures. It is important that we make sure you do not have any leaks, or mechanical compromises that cold temperatures could cause further damage. In most cases, this regular maintenance can prevent catastrophic damage to your engine.

• Check Engine Fluid Levels: Oil, Coolant, Washer Fluid, and other fluids.

• Test Battery & Replace if Necessary

• Use Deicing Washer Fluid: Clean Windshield at Low Temps.

• Switch to Synthetic Oil: Handles the Cold Better

• Inspect Tire Tread: Replace if Near Wear Limit

• Install Snow Tires if You Own Or Purchase a Set

• Test Headlights & Taillights

• Add & Inspect Winter Survival Kit

If you are interested in replacing your vehicle please check out Our Inventory

When to Change the Oil In Your Car?

The #1 rule is to read  your car’s owner’s manual and follow their recommendations. The manufacturer knows your car best and what’s required to keep it running properly. The old rule of thumb was to change your car’s oil every 3,000 miles or every 3 months, whichever came first.

But with today’s advances in motor oil, that’s no longer necessary. Depending on the type of motor oil, your car’s driving conditions, and other factors, you can now go 5,000 to 7,500 miles before an oil change.

What Do The Numbers On The Quart Of Oil Mean?

The numbers on the can refer to the weight or thickness of the oil. The higher the number, the thicker the oil. Thicker oils are better at resisting heat and shearing forces, which is why they're used in high-performance engines.

Viscosity is the oil’s resistance to flow and it’s important because it affects an oil’s ability to lubricate. The thicker the oil, the better it will lubricate, but thick oil doesn’t flow as easily and can cause engine parts to run less efficiently.

How Often Should You Check The Oil Level?

Most cars have oil sensors that will give you a low oil warning when the level gets low. It's still a good habit to check your oil at each fill up to make sure the sensor is working.

What the sensor doesn't tell you is if your oil is dirty and needs to be changed. So, it’s a good idea to check your oil level regularly. Checking your oil only takes a minute and could save your engine.

Which Oil Type Should I Be Using?

Again check your owner’s manual for the type of oil recommended for your car.

If you have an older car, it might require conventional motor oil. Newer cars often require synthetic motor oil, which has special additives that provide better protection against engine wear, extreme temperatures, and sludge buildup.

High mileage oils are designed for vehicles with over 75,000 miles. These oils have special additives that can help prevent leaks and oil consumption in worn engines.

Cars and automobiles have evolved drastically. Just like our bodies, cars need a substantial amount of care and maintenance. Continuous working and no proper maintenance can damage them, leading to hefty expenses on repairs.

Following a schedule for car servicing and keeping an eye on the car’s performance can help avert unnecessary costs. Here are five things to be attentive to if you drive a car, which indicate that your car needs servicing.

Flashing Warning Lights

Futuristic and modern cars are good at indicating what’s wrong with them. They do this by illuminating the light on the dashboard, which means “Check Engine.”

Many cars have a service light that will come on when the next service is due. If you see a yellow light flashing upon the meter, then you should take the car for service, as there are a range of locomotion problems this light could indicate.

Degraded Ride Comfortability

Simply put, if you’re not getting the level of comfort you paid for, then it’s time to put some work into your vehicle.

Getting hitches and irregular steering while driving is a common indicator that the car is operating slow. You might notice the tires scraping as well. These symptoms can signal an issue with your Suspension.

This is a sign that your car needs service, and to keep it in top-notch condition, you should follow the service manual and get it checked regularly.

Unusual Vibration and Noises

When you drive a car, the most annoying thing you can experience is unwanted vibrations and shudders; and they should be checked before they develop into a serious error. Different noises mean different issues.

1. The hoods whining sounds are caused by a loose wire belt and can cause various issues from overheating to battery problems.

2. Unusual noises from the exhaust because of a hole or crack in it. It is easy to fix but can result in your exhaust pipe getting destroyed if not tended early.

3. The metal clashing sound could be a broken part of your car, scrubbing on something, causing damage to both the parts.

4. Uneven engine noises could occur if your car is not able to handle the air/ fuel mixture and can be fixed easily by replacing spark plugs.

Exhaust Smoke And Leaks

If fumes come from the car, you are not in any excessive danger. It can be because of overheating or radiator issues. It is suggested to take a look at your car’s temperature, and if it’s maxed, then let the car cool down until it reaches the middle of the gauge. Excessive smokes from the hood can be a result of oil leaks. If you see blue smoke coming from your car, then it is safe to get someone to tow your car to the garage because it can be a costly problem caused by burning oil.

Smokes and leaks can be of many types depending upon a range of issues, such as worn engine oil seals, head gasket failure, worn valve seals, etc.

Some leaks can indicate significant problems, whereas some can turn out to be mere ignition irregularities.

Sensitive Brakes and Gears

The brakes system and gearbox are the most used utilities of a vehicle and experience wear and tear regularly, making them a lot more prone to dysfunctioning. Gear and brake problems are easily noticeable and easy to fix on an early basis.

Some common issues can be transmitted vibrations while changing gears or squealing when you apply the brakes.

This could be because of worn-out discs or pads, a suspension problem, or an issue with your steering. These symptoms generally arise due to tire wear, so make sure your tires have the required 1.6mm tire tread.

What Is the Best Way to Avoid Problems?

Car owners are always up with questions regarding car problems. The best way to avoid any damage is to make sure to follow specific steps such as:

1. Regular service and maintenance according to schedule.

2. Checking the service plan provided to you.

3. Never wait for things to go wrong, and always try to keep things healthy.

It is essential to take notice of these issues, as they might result in a big problem; then, even your warranty or insurance will not cover it.

How To Check Your Antifreeze

It may not cross most people's minds, but checking your car's antifreeze protection level is an important part of regular maintenance. Anti-freeze helps protect your car from damage caused by cold weather, and keeping it at the proper level could save you from costly repairs down the road. In this article, we will show you how to check your car's antifreeze protection level and what to do if it needs to be adjusted.

What You Need

Before you begin, there are a few items you need for the job:

• An anti-freeze tester: These are usually sold for just a few dollars at any auto parts store.

• Paper towel or rag: This will help keep the anti-freeze off of surfaces like paint that could get damaged.

• Ziplock bag: This will help keep dirt out of your anti-freeze tester while you’re not using it.

Step 1: Locate The Reservoir

The first step is to locate the reservoir where your car’s anti-freeze is stored. This is usually in the engine compartment, and it looks like a plastic container with a lid on top (as seen in Figure 1). There should also be a warning label telling you not to open the lid while the fluid is hot – so always make sure that your car has been sitting idle for at least two hours before proceeding! 

Step 2: Testing The Anti-Freeze

Now that you have located the reservoir, insert the end of your tester into the fluid (you may have to use a straw attached to the bottom of the tester). Then pump up and down until about half of the fluid has been drawn up into the glass chamber on top (Figure 2). Now look at how many “balls” are floating on top of the fluid; this number tells you how well protected your car is against extreme cold temperatures (see Table 1 below). Once done testing, pour any remaining liquid into its original container, then wipe off any residue with paper towel or rag. 

Step 3: Storing The Tester

After testing, take a ziplock bag and store your anti-freeze tester in it until its next use. This will help keep dust and dirt off of it when it’s not in use! And don't forget - always remember that antifreeze is poisonous so make sure none gets on any surfaces outside of its original container!   

Checking your car's antifreeze protection level doesn't have to be difficult or complicated; with these simple steps anyone can do it themselves! With regular testing every few months, you'll know exactly how well protected against extreme cold temperatures your vehicle really is - potentially saving yourself hundreds or thousands of dollars in repairs down the line!